GB-30
Preparation Connections Initial Setup Using the Features Using the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Factory Reset
Restores all settings to factory defaults.
Press the 1.
Menu button and then press the buttons to select the
Function menu.
Press the 2.
button to select Factory Reset and then press the OK button or
the
button to confirm.
Press the 3.
buttons to select “Yes” and then press the OK button to
confirm. The TV will turn off and restart after a few seconds.
Press the 5.
Menu button to return to the previous menu.
Press the 6. Exit button to exit the menu.
Parental Guidance
This function allows you to set up blocking schemes to block specific channels and ratings. It operates according to information
from the broadcasting station, therefore if the signal has incorrect information, this function will not operate.
This TV is programmed to remember which option it was last set to even if you switch the TV off.
When a locked programme is selected, the password screen will appear. Enter the valid password to view the programme.
Press the 1.
Menu button and then press the buttons to select the
Function menu.
Press the 2.
button to select the Parental Control and then press the OK
button or the
button.
Press the 3. 0-9 buttons to enter the password to enter the Parental Control
sub-menu.
Press the 4.
buttons to select Parental Guidance and then press the
buttons to select different rating: Off, 4, ...,18.
A Block Channel List will pop up. Press the 5. buttons to select a channel.
Press the GREEN button on the remote control to block the channel. Press
the GREEN button again to unblock.
Press the 6.
Menu button to return to the previous menu.
Press the 7. Exit button to exit the menu.
To Next Page
Loading...
Need help?
General