Sandstrom SDABXCR13 - Alarm Source and Repeat Configuration; Selecting Alarm Sound Source; Setting Alarm Repeat Frequency

Page 36
The Alarm Source screen will display.
• Turn the TUNE/SELECT dial to set the source. You can choose
between “Buzzer”, “DAB” or “FM”
• Press the TUNE/SELECT dial to conrm.
If you select ‘Buzzer’ the ‘Alarm Repeat’ screen
displays.
Selecting the Alarm Repeat: Once
• Turn the TUNE/SELECT dial to set the repeat.
Choose ‘Daily’, ‘Once’, ‘Weekdays’ or ‘Weekends’.
• Press the TUNE/SELECT dial to conrm.
If you select ‘Once’, the Date screen will display.
• Turn the TUNE/SELECT dial to set the day.
• Press the TUNE/SELECT dial to conrm.
• Turn the TUNE/SELECT dial to set the month.
• Press the TUNE/SELECT dial to conrm.
• Turn the TUNE/SELECT dial to set the year.
• Press the TUNE/SELECT dial to conrm.
The Alarm Volume screen will now display:
• Turn TUNE/SELECT to set the Alarm volume.
• Press the TUNE/SELECT dial to conrm.
Alarm Repeat: Daily, Weekends, Weekdays
Selecting any of these options directly deploys the Volume screen.
• Proceed as above to set
and conrm the alarm
volume.
Conrming the volume, sets the alarm and completes the setup. The
word “SAVED” will display and the Alarm setup wizard will exit.
Setting the Alarm
SDABXCR13_IB_160929_will.indd 36 30/9/2016 2:37 PM