6-4-3 交流電圧(ACV〜) 最大測定電圧AC 600 V
〜
6-4-3 ACV MeasurementMaximum rating input value 600 VAC.
1Applications
Measures sine-wave AC voltages such as lighting voltages.
2Measuring ranges
12/30/120/300/600(5ranges)
3Measurement procedure
Connect the black plug of the test lead to the −input
terminal and the red plug to the +input terminal.
Set the range selector knob to an appropriate ACV range.
Apply the black red test pin to measured circuit.
Read the move of the pointer by VA scale.
After measurement, remove the red and black test pins from
the circuit measured.
Since this instrument employs the means value system for its
AC voltage measurement circuit, AC waveform other than sine
wave may cause error.
There occurs error under such frequencies other than specified
specification.