Sanwa SP21 - 6−7 電池負荷電圧測定; Battery Check


DRAWING No SP21 18-1805 2040 2040
1）Application
Measured battery voltage.
2）Measuring ranges
/
3）Measurement procedure
①Connect the black plug of the test lead to the −input
terminal and the red plug to the +input terminal.
②Set the range selector knob to an appropriate or
range.
1.5V
1.5V
1.5V
1.5V

 








󰴤

󰴥

6-7 Battery check
1.5V
6-7 電池負荷電圧測定

警 告
Never apply an input signals exceeding the battery voltage to
the input terminals.
WARNING
1.5V
1.5V
1.5V
1.5V