7-3 内蔵電池の交換
警 告
〈内蔵電池の交換方法〉
7-3 How to Replace Battery and Fuse
1. If the rear case or the battery lid is removed with input applied
to the input terminals, you may get electrical shock. Before
starting the work, always make sure that no inputs is applied.
2. Be sure to use the fuse is same rating so as to ensure safety
and performance of tester.
3. When operator remove the battery lid, do not touch the
internal parts or wire with hand.
WARNING
How to replace the battery
①Remove the battery lid screw with a screwdriver.
②Remove the battery lid.
③Take out the battery and replace it with a new one.
④Attach the battery lid and fix it with the screw.
To Next Page
Loading...
