6-8 導通（ ）チェック
警 告
6-8 Checking Continuity（ ）
Never apply voltage to the input terminals.
WARNING
1）Application
Checking the continuity of wiring and selecting wires.
2）How to use
① Connect the black plug of the test lead to the −input
terminal and the red plug to the +input terminal.
②Set the range selector konb at range.
③Apply the red and black test pins to a circuit or conductor to
measure.
④The continuity can be judged by whether the buzzer sounds
or not.
⑤After measurement, release the red and black test pins from
the object measured.
To Next Page
Loading...
