Sanwa SP21 - 6−4−1 直流電圧 （DCV; 6−4 電圧 （Ｖ） 測定; Voltage Measurement; DCV Measurement


DRAWING No SP21 18-1805 2040 2040
6-4 電圧（V）測定




警 告
6-4-1 直流電圧（DCV ） 最大測定電圧DC 600 V




6-4 Voltage Measurement
1. Never apply an input signals exceeding the maximum rating
input value.
2. Be sure to disconnect the test pins from the circuit when
changing the function.
3. Select the maximam range and measure in case the extent of
value to be measured can not be predicted.
4. Always keep your fingers behind the finger guards on the
probe when making measurements.
WARNING
6-4-1 DCV Measurement（ ）Maximum rating input value 600 VDC
1）Applications
Measures batteries and d.c. circuits.
2）Measuring ranges
0.3/3/12/30/120/600（6ranges）