SRT55D Off-Highway Truck
4-6
Safety, Operation and Maintenance Manual
10. Seat and seat belts
Adjust the seat position and lap belt as
required to allow complete machine control
at all times with minimum fatigue. Make sure
the seat belt does not restrict movement for
proper machine operation (see Fig. 4-10 and
4-11).
4.3 Engine Operation
Note:
The electronic controlled engine will
override the electronic foot pedal position
until the engine is warmed up to the correct
operating temperature. The engine MUST
be started with foot 'OFF' the electronic foot
pedal.
Do not place engine under FULL LOAD at
FULL SPEED IMMEDIATELY after starting.
Fig. 4-10
Fig. 4-11
Safety belt
Safety belt
Operating the Truck
To Next Page
Loading...