SANY SRT55D - Maintenance Inspection Form for 600 Hrs

SRT55D Off-Highway Truck
8-33
Safety, Operation and Maintenance Manual
8.6.7 Maintenance inspection form for 600hrs
Except daily (10hrs) inspection projects, the following projects also have to nish after running
600hrs.
1. For normally checking
Check leakages, loosened and damaged parts for truck.……….........…………………………
Observe the cracks and welder seam for frame……………................................................…
Check displacement and worn for transmission shaft by lever.……….....................…….……
2.Lubrication
Universal joint of steering rod................................................................................................3 points
Hands lubrication system
Check and clean the grease lter element…………....................………………………………
3. Electrical system
Check harnesses status.………………………………..................………………………………
Check status about cables for storage battery……………………………………………………
4. Cummins engine
Check the fasteners for engine………………………………………...........................…………
Check PTO liquid level, rell as required……………………..…………..............………………
Air cleaner………………………………………………………………....…………………………
Clean pipeline and lter for air cleaner............................………………………………..………
5. Transmission
Clean the breather assembly for transmission and lubricates again.……...........……..………
Check status about block caution lamp for lter.……………………................................…….
Remark:
drain, replace lter and rell after 150hrs, if transmission has been xed.
6. Main reducer and differential assembly,planetary assembly and power take-off (PTO)
Extract lubrication sample from Main reducer and differential assembly and planetary assembly
for checking and analysis ...................................................................................................…
Check liquid level, rell as required…………………………………………......…………………
Check and clean the breather assembly for differential.………………..............………………
Check and clean the breather assembly for PTO……………………….............…………...…
Remark: change oil when replace new one or after xed.
7. Clean up the dust on the pin shaft of foot-operated valve,and add the lubricating oil.……
Checker Date
Remarks
Lubrication and Servicing
Courtesy of Machine.Market