Safety
Safety, Operation and Maintenance Manual
2-32
SRT55D Off-Highway Truck
2.3.2.8 Preparing the machine
Before maintaining the machine:
●
Plac e the parking switch to "Par k"
position.
●
Move the transmission to Neutral position.
●
Raise the hand lever to "Float" position.
●
Run the engine at idle speed for 3 to 5
minutes to cool the engine.
●
Move the steering wheel back and forth
to release the residual pressure in the
accumulator.
●
Turn the start switch to OFF position and
stop the engine.
●
Close the windows and the cab door.
●
Lo c k a l l a c ce s s d o ors , b o x es an d
chambers.
●
When leaving your machine, face the
machine and maintain a three-point
cont act with it. Never j ump off the
machine.
●
Be careful with slippery aisle and ladder
when dismounting the machine.
To Next Page
Loading...