SANY SRT55D - Maintenance Procedures; Daily (10 Hrs) Maintenance Inspection Form

SRT55D Off-Highway Truck
8-19
Safety, Operation and Maintenance Manual
8.6 Maintenance Procedures
8.6.1 Daily (10hrs) maintenance inspection form
For regular inspection and duty, lls this form out each 10 hrs. This form should be used with
other forms in this manual.
1.For normally checking
Check all operation devices by driving
……………................................................……………
2.Lubrication
Hands lubrication system
Check crack or leakage and damaged of the ttings, replace them if required.……....………
Check status of the lubrication point...................................................…………………………
Check the electric pump...................................................………………………………………
Rell oil to the lubrication system via centralization lubrication machine which mounted on the
frame and under the bearing of the rear lamps.............................................................………
3. Electronic system
Check and reads the current gauge.……………………………………..…………………..……
Check status about all of indication lamps, caution lamps, meters and assistant devices..…
4. Cummins engine
Check liquid level, rell as required.……………………………………….....……………………
Check leakages.…………………………………………………………..…………………………
Check damaged for fans………………………………………………….........................………
Check the oil temperatures and read pressures.……………………….........................………
Check tension of the driving belt and adjust as required
……………………......………………
Check fuel system
Check leakages for fuel system……..…………………………………...............................……
Check liquid level and rell after daily job.……..………………….................................………
Cooling system
Check coolant level, rell as required.……………….……………......................………………
Check leakages for hoses and other components……….…………...........……………………
Air cleaner
Check status for the vacuator valve..……………………………..........................................…
Check status for lter………………………………….……..........................................……..…
Check leakages and cracks for air-intake system.………….………..........................…………
5. Transmission
Check leakages………………………………………………..........………………………………
Check liquid level, rell as required……………………......………………………………………
Check oil temperatures and pressures……………………........................................…………
6. Suspension system
Check water level for front and rear ride cylinder according to service manual.………………
Check leakages.……………..........................................................................…………………
7. Wheels
Check status and pressures……………………...................................…………………………
Lubrication and Servicing
Courtesy of Machine.Market