SRT55D Off-Highway Truck
8-41
Safety, Operation and Maintenance Manual
supplement:
5.Bearing
Check the wearing status for oscillating bearings of steering drag link, replace new
one if the clearance of the bearing S≥ 0.54mm .Conversely, you could continue use it.
.…....................................................................................................................................…
Check the wearing status for oscillating bearings of A-shape arm, replace new one
if the clearance of the bearing S≥ 0.55mm .Conversely, you could continue use it.
.…....................................................................................................................................…
Check the wearing status for oscillating bearings of ends of the A-shape arm, replace
new one if the clearance of the bearing S≥ 0.7mm .Conversely, you could continue use it.
.…....................................................................................................................................…
Check the wearing status for oscillating bearings of steering cylinder , replace new
one if the clearance of the bearing S≥ 0.54mm .Conversely, you could continue use it.
.…....................................................................................................................................…
Check the wearing status for oscillating bearings of front suspension cylinder , replace new one if
the clearance of the bearing S≥ 0.55mm .Conversely, you could continue use it..............….
Check the wearing status for oscillating bearings of rear suspension cylinder , replace new one if
the clearance of the bearing S≥ 0.63mm .Conversely, you could continue use it..............….
7. Check screw between steering arm and front suspension cylinder. If loosed or damaged ,tighten
or replace new screw………………………………………..................………………………..…
Checker Date
Remarks
Lubrication and Servicing
To Next Page
Loading...