SRT55D Off-Highway Truck
8-53
Safety, Operation and Maintenance Manual
supplement:
8.Bearing
Check the wearing status for oscillating bearings of steering drag link, replace new
one if the clearance of the bearing S≥ 0.54mm .Conversely, you could continue use it.
.…....................................................................................................................................…
Check the wearing status for oscillating bearings of A-shape arm, replace new one
if the clearance of the bearing S≥ 0.55mm .Conversely, you could continue use it.
.…....................................................................................................................................…
Check the wearing status for oscillating bearings of ends of the A-shape arm, replace
new one if the clearance of the bearing S≥ 0.7mm .Conversely, you could continue use it.
.…....................................................................................................................................…
Check the wearing status for oscillating bearings of steering cylinder , replace new
one if the clearance of the bearing S≥ 0.54mm .Conversely, you could continue use it.
.…....................................................................................................................................…
9. Check screw between steering arm and front suspension cylinder. If loosed or damaged ,tighten
or replace new screw………………………………………..................………………………..…
10. Clean up the dust on the pin shaft of foot-operated valve,and add the lubricating oil...…
Checker Date
Remarks
Lubrication and Servicing
To Next Page
Loading...