18
2. Setup Procedures
■ When projecting with the Moderator function.
For details about Moderator function, refer to the "8. Use the Moderator Function".
a Install "NetworkModule Client" into each client's (participants except for the moderator)
computers. For installation, refer to"■ When projecting via a selected computer which is
connected to the LAN". (p17)
s Click (Select) "NetworkModule Moderator" on the left side of the screen.
d Click "Install NetworkModule Moderator".
✳ By clicking the "Launch NetworkModule Moderator", you can activate the software directly
from the CD-ROM without installing the software into the computer.
f Install each software with following the instructions on the installation screen.
g After the installation, the start-up menu will be displayed or the program icon
will be added on the screen.
h Activate the program to confirm the installation. When the program is activated, the
operation screen will appear.
Refer to "3. Names and Functions of the Operation Screen" (p19-23) to operate each program
screen.
To uninstall (delete) each program, activate the uninstall program in the application start
menu.
To Next Page
Loading...
Need help?
General
