82
SYSTEM Adjustment
On this screen, you can select the color system and scan mode for the video signal. This
screen is displayed only when Video (Video/Component) is selected for the input source of the
projector. Depending on the signal, the screen is varied as follows.
Component Input
VIDEO/S-VIDEO Input
Parameter Description
System Adjustment ..........Select a scan mode of
component signal.
AUTO ................................Automatically adjust to the
scan mode of the input signal.
Parameter Description
Color System Adjustment
......................Select a color system of
Video/S-Video signal.
AUTO ................................Automatically adjust to the
color system of the input
signal.
NOTE: Items in System Adjustment are displayed only for video input (video/Component).
10. How to Use the PJ Controller
To Next Page
Loading...
