41
6. Configurations with Browser
Starting up the Browser
English
Advanced Settings
button
Advanced Settings
Configure
NetworkModule
button
Network Projector List
1. Turn on the projector.
2. Activate NetworkModule Client (or NetworkModule Moderator).
3. Select the projector to set from the Network Projector List. (Selected projector will be blue.)
4. Click the Advanced settings button to display the Advanced settings. Click the Configure
NetworkModule button to display the NetworkModule Configuration screen.
You can also activate the screen directly from the browser screen without using
NetworkModule Client (or NetworkModule Moderator). Enter the projector's Network IP
address in the URL address bar of the browser.
Use this browser screen to configure various settings. The screen can be displayed either in
"English" or "Japanese". Select "English".
Select the item to configure on the left side of the screen. Configure each item on the right
side of the screen.
✳ While sending the data to the projector, you cannot activate the browser of the projector.
✳ The projector cannot be connected to via the networks while using the viewer.
Screen of Wired LAN
Select English / Japanese
To Next Page
Loading...
Need help?
General
