48
6. Configurations with Browser
The projector has a function to send e-mails to inform its operating condition to the
administrators or users. This function can not be used for Wireless AdHoc mode. This function
is available only for Wired or Wireless LAN infrastructure mode.
Parameter Description
SMTP Server ..................................Enter the address of SMTP server. (up to ASCII254 characters)
Administrator Address ....................Enter the E-mail address of administrator. (up to ASCII254 characters)
Mail Address ..................................Enter E-mail addresses of users. (up to ASCII254 characters)
Option......................................When the checked item has occurred, the projector sends alert
messages.
Time ................................................Set the time of "Accumulated Lamp-use time reaches in ***hours".
Attached Message ......................Attach the message to the e-mail of "Accumulated Lamp-use time
reaches in ***hours". (up to ASCII220 characters)
APPLY button ..................................Click the APPLY button to update. The screen to restart the projector will be
displayed.
REFRESH button ............................Update and show the adjusted data.
RESTORE Factory Default
Settings button ..........Restore the settings to the values at the factory.
E-mail
To Next Page
Loading...
Need help?
General
