75
10. How to Use the PJ Controller
Initial Settings
Before using the PJ Controller function, initial setting is required.
1. Select Initial Setting from the main menu and configure each item.
Parameter Description
Language ........................................Select a desired language from the pull-down menu, and click "Set".
Temperature ................................Set the unit of temperature displayed on the control screen of the
projector. Select "Centigrade" or "Fahrenheit" from the pull-down menu
and click "Set".
Comment ........................................You can store any comments regarding the initial settings. To save the
comments you entered, click "Save".
English
To Next Page
Loading...
Need help?
General
