43
6. Configurations with Browser
* Not shown at Wired LAN setting.
Parameter Description
Firmware Version ............................Show the firmware version of the projector.
Boot ROM Version ..........................Show the boot ROM version of the projector.
Hardware Address ..........................Show the MAC address.
IP Address ......................................Show the IP address currently set on the projector. If DHCP is set, the
IP address assigned from the DHCP server is displayed.
Wireless Mode* ..............................Show the Communication standard 802.11b or 802.11b.g
Wireless Link Status*......................Show the Wireless communication mode and its status of the projector.
WEP Security* ................................Show the WEP (Encryption) setting status of the projector.
However, the WEP key is not shown.
Current SSID* ................................Show SSID set on the projector.
Current Channel*......................Show the channel, through which the projector is currently
communicating.
Data Transfer Rate* ........................Show the current Wireless communication speed of the projector. The
communication speed is automatically changed by the environment at
that time (11/5.5/2/1/54/48/36/24/18/12/9/6 Mbps). The communication
speed cannot be fixed.
Current User/PC..............................Show the IP address of the computer, which is currently transferring
images to the projector
System Time ..................................Show the elapsed time since the power is turned on.
The time can be reset by selecting “Reset” from the browser
configuration screen, or by disconnecting power from the projector and
connecting back on.
Projector ..........................................Show the name of projector. (Can be changed)
Refresh button ................................Refresh the displayed data.
Parameters and descriptions of Information
English
To Next Page
Loading...
Need help?
General
