90
Parameter Description
Power................................Turn on or off the projector.
✳ When using the Multi Control function, set "Normal" from "Setting menu" ➔
"Standby mode". If selecting "Eco", you cannot turn on the projector again after
turning off.
Input..................................Select projector input.
Image................................Select Image mode.
Aspect ..............................Select aspect of the screen.
Digital Zoom......................Zoom in or out the screen.
Volume..............................Adjust the volume of the speaker on the projector.
Mute ................................On or Off the Mute function.
Blue Back..........................Select "ON", to project blue screen when the input source is not detected.
On Screen ........................Select to display or not to display the On screen menu.
No Show ..........................Select "ON" to display the blank screen.
Freeze ..............................On or off the Freeze function.
On Start ............................Select to turn on or off the projector with the projector power source.
Lamp Control ....................Select the brightness of the screen.
Key Lock ..........................Lock or Unlock the key operation of the projector and the remote control.
✳ Items with "SET" button requires to click "SET" to be effective.
NOTE :Items to adjust differ depending on the projector.
With some projectors these functions may not work properly.
10. How to Use the PJ Controller
To Next Page
Loading...
Need help?
General
