134
Accessories (Options)
Product Order No.
Data interface (must be installed at the Sartorius
Fast Factory or by a Sartorius service technician)
for FC…BBE/CCE models: TTY/10 mA YDO01F-X
for FC…BBE/CCE models: RS-485 YDO02F-X
for FC…EDE models RS-485 YDO03FC-X
for FC…EDE models TTY/10 mA YDO04FC-X
for FCA models: TTY/10 mA YDO01FT-X
for FCA models: RS-485 YDO02FT-X
Sartorius serial Profibus interface for RS-232 YSPI-232
for the installation in safe areas behind Zener barier
Sartorius serial Profibus interface for RS-485 YSPI3-485
for the installation in safe areas behind Zener barrier
Cable for connecting weighing platform to separate
display and control unit (length: 2.70 m ~ 9 ft.) Ask for
– for FC…EDE models information
– for models with a weighing capacity ≤12 kg YCC01-19M3
Tiltable retainer
– for installing the FC…EDE or FCA display and control unit YDH01F
on the front of the scale or on the wall
Wrap-around load plate YLP01
– for models FC6CCE-SX, FC12CCE-SX, FC12CCE-I X
Hook for under-scale weighing for FC-EDE models 69EA0040
Calibration weights Ask for
for all FC/FCA scales, extensive assortment, optionally available information
with officially recognized DKD certificate
Extension cable YCC01-01ISM6
12-pin round male connector/12-pin round female connector
(6 m; ~ 20 ft.)
Interface cable YCC01-03ISM5
for connecting a PC to the YDI03-Z, YDI01-Z Zener barrier
Interface cable YCC01-0019M3
for directly interfacing the scale to the YDP03-0CE
data printer (via Zener barrier)
Adapter cable YCC01-0016M3
From round male connector to RS232-D-Submini
female interface connector; for directly connecting
Sartorius accessories to the scale (via Zener barrier)
Adapter cable, from 25-pin D-Submini 6965619
male connector to 9-contact D-Submini
female connector; length 0.25 m (~ .8 ft.)
Adapter plate for fastening the FCA display and control YAS01FCT-X
unit to the floor stand
Floor stand (stainless steel), height: 1.1m (approx. 3.5 ft) YDH03IS
– for FCA display and control units
(adapter plate YAS01FCT-X required)
Retainer for mounting the YRB02-X external rechargeable YBPH01
battery pack on a YDH03IS/YDH02CIS column or on the wall
To Next Page
Loading...
