32
Additional Functions
In addition to the functions:
– alphanumeric input
– taring (not during alphanumeric input)
– printing
you can also access the following
functions from the weighing
application:
Calibration
§ Press
isoTST
> See the section on “Calibration/
Adjustment” for further instructions.
Setup
§ Press H
> See the chapter entitled “Configuration”
for further instructions.
Turning Off the Scale
§ Press e
> The scale shuts off
> The display goes blank
Practical Examples
Example W1: Simple weighing
Step Key (or instruction) Display/Output
1. If necessary, tare the scale t
2. Enter sample ID see Example W2
3. Determine sample weight Place load on scale
(Example)
4. Print weight value p
To Next Page
Loading...
