87
Preparation
● Turn on the scale: press e
> The Sartorius logo is displayed
● Select Extra function (F4) or Extra function (F5) in the Setup menu: press H
● Select
Application parameters: press the q soft key 2+,
then the
O soft key once
● Select
Extra function(F4) or Extra function(F5):
press the
q soft key 3+ (or 4+), then the O soft key once
● Select
Identification codes
● Confirm Identification codes
Identification Printout Automatic, if configured
Once after pressing print, if configured
ο Each time the print key is pressed
Once for M+ function (app. 3 memory)
ο = factory setting
see also the “Application Parameters (Overview)” in the chapter entitled “Configuration”
● Save settings for the printout: press the
o soft key 4+
● Enter ID name: Select “Printout”: press the
q soft key, then the O soft key
● Select “Identification #”: press the
q soft key 5+, then the O soft key once
● Select
ID1
● Enter name for ID1 and confirm: use the numeric keys for numbers and/or the
soft keys to enter letters
$ Enter names for
ID2, ID3 and ID4, if desired
● Save settings and exit the Setup menu: press the
oo soft key
Example
See next page
To Next Page