96
Step Key (or instruction) Display/Output
5. Initialize Checkweighing
Toggle to Checkweighing D
6. Enter target, minimum and
Param. soft key
maximum values (here: target: 1 0,
l soft key
10 pcs; minimum: 7 pcs; 7,
l soft key
maximum: 12 pcs) 1 2
7. Store input
l soft key
8. Determine first unknown quantity Place uncounted parts
on the scale
9. Toggle to Statistics D
10. Initialize automatic storage
M+ soft key
11. Determine further unknown Place parts to be counted
quantities on the scale
Printout is generated automatically
12. End weighing series c
Statistics are evaluated
Final GMP printout is generated
13. Delete initialization of the c
last application
To Next Page
Loading...
