130
General Views of the Balances
LA1200S (-0CE), LA620S (-0CE), LA220S (-0CE), LA620P (-0CE), LA5200D, LA3200D, LA2000P
-0CE identifies the precision balances as verified for legal metrology in the EU*
No. Designation Order no.
for replacement
1 Draft shield cover 69 LP0002
2 Glass draft shield cylinder 69 14290
3 Weighing pan 69 LP0004
4 Pan support – LA 3200D: 69 LP0006
– LA 1200S, LA 620, LA 220S: 69 LP0005
5 Shield disk 69 LP0003
6 Leveling foot 69 B20005
7 Display and control unit
8 Metrological ID label
(only on verified models or models acceptable
for legal metrological verification)
9 Lug for attaching an antitheft locking device
10 DC jack
11 Tare key
No. Designation Order no.
for replacement
12 Function keys
13 Print key
14 Keys for numeric input
15 On/off key
16 Toggle key for alphabetic input
17 Weight display
18 Interface port
19 Level indicator
Not shown:
In-use dust covers:
– For weigh cell 6960FB01
– For control unit 6960LA02
Protective caps and plugs (set) 69 B20009