41
Preparation
G Select the balance function for “calibration/adjustment”: press o
G To select the
Balance/scale functions: press the O soft key
G Select
Calibration/adjustment: press the O soft key
Calibration/ CAL key function Ext. cal./adj.: default wt.
adjustment Ext. cal./adj.: user-defined wt.
Internal cal./adjustment
Key blocked
reproTEST*
ο Selection mode
Cal/adjustment ο Calibrate, then auto adjust
sequence Calibrate, then manual adjust
isoCAL function Off
Only adjustment prompt
On and reset application
ο On without resetting app.
Start automatic User-def. Adj. time1
adjustment adjustment times Adj. time2
Adj. time3
ο isoCAL
Print GLP/GMP ο Automatic if GLP is selected
adjustment record On request, from record memory
Parameter for Weight ID (Wt. ID)
external weight Cal./adj. wt.:
ο = factory setting
G Save settings and exit Setup menu: press the
oo soft key
* = How to run this application is described in detail in our “Genius ME” Installation and Operating Instructions.
Request your copy directly from Sartorius or download it from the Internet (www.sartorius.com; see “downloads”)
To Next Page
Loading...
Need help?
General
