59
Practical Example
Determining Animal Weight With Automatic Start of 20 Subweighing Operations for Averaging; Automatic Printout of the Number of Sub-
weighing Operations and of the Animal Weight
Settings (changes in the factory settings required for this example):
Setup: App: Application 1: Animal weighing: Animal activity: Active
Setup: App: Application 1: Animal weighing: Printout: Average and calculated values
Setup: App: Printout: Auto print upon initialization: All values
Step Key (or instruction) Display/Output
1. Delete previous setting if necessary c
2. Prepare a container (cage) Place empty cage
on the balance
3. Tare the balance w
4. Enter number of subweighing 2 0
operations for averaging
5. Save number
mDef soft key
6. Weigh the first animal Place 1st animal in cage weight value fluctuates due to animal activity
7. Start automatic animal weighing
Start soft key
The balance delays starting the When this criterion is met, the
subweighing operation until subweighing series begins
three successive subweights lie
within the range defined for
an “active” animal
To Next Page
Loading...
Need help?
General
