SATO CG2 Series Quick Guide

Section 9: Basic Specifications
CG2 Series Quick Guide Page 9-1
BASIC SPECIFICATIONS
Model name CG208 DT CG212 TT CG208 TT CG212 TT
Head density
(resolution)
203 dpi (8 dots/
mm)
305 dpi (12 dots/
mm)
203 dpi (8 dots/
mm)
305 dpi (12 dots/
mm)
Printing method Direct Thermal Thermal Transfer (Direct Thermal/
Thermal Transfer)
Printing area 2.2” wide x 23.6” pitch
(56 mm wide x 600 mm pitch)
2.2” wide x 15.7” pitch
(56 mm wide x 400 mm pitch)
Label issuing
mode
Standard: Continuous mode, Tear off mode, Sensor off mode
Optional: Dispenser mode, Cutter mode
Printing speed 2, 3 or 4 inches/second (Setting: 2, 3, 4)
50, 75 or 100 mm/second (Setting: 50, 75, 100)
Unprintable area Label:
Length direction Upper: 0.1” (1.5 mm) or less Lower: 0.1” (1.5 mm) or less
(Not including backing paper)
Width direction Left: 0.1” (1.5 mm) or less Right: 0.1” (1.5 mm) or less
(Not including backing paper)
Tag:
Length direction Upper: 0.03” (0.8 mm) or less Lower: 0.03” (0.8 mm) or less
Width direction Left: 0.03” (0.8 mm) or less Right: 0.03” (0.8 mm) or less
Paper type Roll paper, fan-folded paper
Paper shape Only use paper manufactured or specified by SATO.
Paper thickness 60 to 190μm, 0.00” to 0.01” (0.06 to 0.19 mm)
Label size See Label size table later in this unit.

SATO CG2 Series Specifications

General

Brand	SATO
Model	CG2 Series
Category	Printer
Language	English