SATO GL4xxe Series User Manual

Unit 4: Printer Configuration
GL408-412e Operator’s Manual
4-69
ZGL EMULATION MODE (TABLE 4-11)
MENU DESCRIPTION
Permits entry into the EMULATION Mode.
Allows the specific emulation to be selected or if the Select option is chosen, the menu to follow
will contain a list of emulation options available.
Allows the selection of the specific emulation to be selected from a list.
The allowable emulation options are: PGL for Printronics, ZGL for Zebra, TGL for TEC, IGL for
Intermec, SGPL for SATO, and DGL for Datamax.
Is the menu selection screen for the EMULATION Mode.
This menu allows compatibility selection to ZPL-I or ZPL-II.
•ZPL-II - factory default. Zebra Programming Language II.
• ZPL-I - Zebra Programming Language I.
Allows selection of control instructions command prefix.
The allowable range is 1 to 255, and the factory default is 126.
EMULATION
EMULATION
Select
Select
ZGL*
ZGL Setup
ZPL Compatible
Command Prefix
Label Prefix
Delimiter
Text Mode
Preparser Cmd
Preparser Port
MC Label Fmt
PQ Label Fmt
Label Buf Size
Host Form Length
Left Position
Top Position
Resolution Mode
Vertical Adjust
Vertical Density
IS Label Fmt
FB Width Adjust
Storage Select
Network ID
Character Group
Standard Sets
ZPL Compatible
ZPL - II*
Command Prefix
126*

SATO GL4xxe Series Specifications

General

Brand	SATO
Model	GL4xxe Series
Category	Barcode Reader
Language	English