SATO GL4xxe Series - DIAGNOSTICS MODE

Unit 4: Printer Configuration
GL408-412e Operator’s Manual
4-18
DIAGNOSTICS MODE
This set of menu screens allows for the confirmation of various printer configurations, testing of its operational
condition, and the monitoring of certain past activities. Use the keys of the printer’s operator panel to select and
enter the required options.
Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.
Figure 4-15, Diagnostics Mode
DIAGNOSTICS
Head On Time
XX.X Hours
DIAGNOSTICS
Priority Setting
Printer Tests
Test Count
Software Build
Hex Dump Mode
Print Error Log
Clear Error Log
Flash Installed
DRAM Installed
Ptr On Time
Printer Usage
PrintHead Usage
Head On Time
Reset Head Data
PrintHead Usage
Head Type
Head Voltage
POWER
ONLINE
OFFLINE
LINE
FUNCTION
Priority Setting
Command*
Printer Tests
Checkerboard*
Software Build
XXXXXX VX.XXX
Hex Dump Mode
Disable*
DIAGNOSTICS
FLASH Installed
8 Megabytes
DIAGNOSTICS
DIAGNOSTICS
DRAM Installed
32 Megabytes
DIAGNOSTICS
Printer Usage
XXXXX.X Meters
DIAGNOSTICS
PrinterHead Usage
XXXXX.X Meters
DIAGNOSTICS
Head Type
XXX DPI
DIAGNOSTICS
Head Voltage
XX.XX +/- X.XX volts
ENTER
Test Count
5 Pages*
DIAGNOSTICS
Print Error Log
DIAGNOSTICS
Clear Error Log
Error Log Clear
DIAGNOSTICS
Reset Head Data
Resetting
Head Data
ENTER
Screens
only display if
Admin User is
enabled within the
Advanced
Mode
DIAGNOSTICS
Ptr On Time
XXXXX.X Hours