Unit 6: Maintenance
GL408-412e Operator’s Manual
6-2
CLEANING PROCEDURES
Cleaning of the printer is a necessary maintenance activity to ensure print quality and longer printer life. There are
tow basic types of cleaning involved; the removal of loose debris and the removal of residue.
Use a soft cloth and/or a pneumatic blower to remove debris from the printer. This process should be performed
prior to the removal of residue. To remove residue, apply SATO Solvent or isopropryl alcohol to a clean cotton
swab and gently wipe the entire surface of the print head and platen roller clean.
WARNING: DISCONNECT POWER SUPPLY TO THE PRINTER AND ALLOW TO
COOL TO ROOM TEMPERATURE PRIOR TO CLEANING. EXCERSIZE CARE
WHEN CLEANING TO PREVENT PERSONAL INJURY.
CAUTION: IF USING A PNEUMATIC BLOWER TO REMOVE DEBRIS FROM THE
PRINTER, EXCERSIZE CARE TO PREVENT PRINT HEAD DAMAGE.
To Next Page
Loading...
