SATO GL4xxe Series - Advanced Mode

Unit 4: Printer Configuration
GL408-412e Operator’s Manual
4-5
ADVANCED MODE
The Advanced Mode is provided to make basic printer operational adjustments. Typically, once these adjustments
or settings have been made, they will not require additional address unless a new job is downloaded. Use the keys
of the printer’s operator panel to select and enter the required options.
Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.
Figure 4-3a, Advanced Mode
ADVANCED MODE
Print File List
ADVANCED MODE
Power Saver Time
ADVANCED MODE
Run Profile
ENTER
ADVANCED MODE
Media Handling
Adv Continuous
Print Mode
Gap/Mark Sensor
Run Auto Cal
Run Profile
Power Saver Time
Pwr Save Control
Display Language
Alarm
Auto Online
Cancel Key
Ret. Status Port
Del Char frm F1s
Ld Char from F1s
Save Char to F1s
Del Char frm RAM
Ld Char at PwrUp
Del Set frm F1s
Ld Set from F1s
Save Set to F1s
Del Set from RAM
Ld Set at PwrUp
Main FFS
Optimize&Reboot
Print File List
Auto Locking
Set Lock Key
Max Font Buffer
Max Cache Memory
Max Cached Char
Standard Chars.
Bold Chars.
Extra Bold Char.
OCR-A Chars.
OCR-B Chars.
Tall Characters
Batch Counter
Disp. Intensity
Sensor Setup
Admin User
POWER
ONLINE
OFFLINE
LINE
FUNCTION
Media Handling
Continuous*
Print Mode
Transfer*
Gap/Mark Sensor
Gap*
Display Language
English*
Auto Online
Enable*
ADVANCED MODE
Adv Continuous
Standard*
ADVANCED MODE
Run Auto Cal
Please Wait
Sensed Distance
XX.X mm*
Media Profile
Enter to Stop
Power Saver Time
15 minutes*
Pwr Save Control
Enable*
Alarm
On*
Set Calendar
MM/DD/YY
hh:mm
Cancel Key
Enable*
Ret. Status Port
Disable
ADVANCED MODE
Del Char frm F1s
Ld Char from F1s
Save Char from F1s
Del Char frm RAM
Ld Char at PwrUp
Del Set frm F1s
Ld Set from F1s
Save Set to F1s
Del Set from RAM
Ld Set at PwrUp
Main FFS
Optimize&Reboot
A
F
E
D
A
C
Screens
only display if
Admin User is
enabled within the
Advanced
Mode.