Unit 2: Technical Data
GL408-412e Operator’s Manual
2-2
PHYSICAL CHARACTERISTICS
Width 10.75 Inches (271 mm)
Height 12.00 Inches (305 mm)
Depth 18.00 Inches (455 mm)
Weight 33 Pounds (15 Kg)
ENVIRONMENTAL
Operating Temperature 41 to 104°F (5° to 40°C)
Storage Temperature -4 to 140°F (-20° to 60°C)
Storage Humidity 15 to 85% RH Non-Condensing
Operating Humidity 15 to 85% RH Non-Condensing
POWER
Input Voltage 100-120/200-240 Volts AC +/- 10%, 50/60 Hertz +/-5%
Consumption Voltage
Maximum: 222 Volts AC, 219 Watts (when print ratio is 50%)
Standby: 22.3 Volts AC, 20.6 Watts
PROCESSING
CPU 32 Bit RISC
Flash ROM 8 Megabytes
Receive Buffer 2.95 Megabytes maximum, 0.95 Megabytes near full
COMMAND
Standard
SATO Barcode Printer Language (SBPL)
Intelligent Command
Non-Standard N/A
INTERFACE MODULES
Enhanced Parallel Port IEEE1284 (EPC compatible)
Serial Port 9-Pin RS232C
Universal Serial Bus (USB) USB Adapter (480 Mbps)
Local Area Network (LAN) 10BASE-T/100BASE-TX Automatic Switching
Ethernet (Wireless LAN) 802.11g Wireless Wi-Fi
PRINT
Method Direct Thermal / Thermal Transfer
Maximum Speed (selectable) 2, 3, 4, 5, 6, 7, 8, 9, 10 Inches Per Second (50.8 - 254 mm)
Print Module (dot size) .0049 Inches (.125 mm)
Resolution
GL408e: 203 Dots Per Inch (8 dpmm)
GL412e: 305 Dots Per Inch (12 dpmm)
Maximum Print Width 4.09 Inches (104 mm)
Maximum Print Length 98.98 Inches (2514 mm)
To Next Page
Loading...
