SATO GL4xxe Series User Manual

Unit 4: Printer Configuration
GL408-412e Operator’s Manual
4-84
Is an informational screen that displays that the error log is clearing.
Is an informational screen that displays the amount of flash memory installed.
Is an informational screen that displays the amount of DRAM installed.
Is an informational screen that displays the cumulative time in hours the printer has been
powered on. This value is set to zero at the factory following testing.
Is an informational screen that displays the cumulative distance the printer has moved media.
This value is set to zero at the factory following testing.
Is an informational screen that displays the length of media actually printed since the last Reset
Head Data operation. This value is set to zero at the factory following testing.
Is an informational screen that displays the cumulative time that power has been applied to the
print head since the last Reset Head Data operation. This value is set to zero at the factory
following testing.
Is a subset of menus that allows the operator to reset all print head statistics values (Head Prt
Dist, Head On Time) to zero.
Is an informational screen that displays that the head data is clearing.
DIAGNOSTICS MODE (TABLE 4-15)
MENU DESCRIPTION
Error Log Clear
DIAGNOSTICS
FLASH Installed
8 Megabytes
DIAGNOSTICS
DRAM Installed
32 Megabytes
DIAGNOSTICS
Ptr On Time
XXXXX.X Hours
DIAGNOSTICS
Printer Usage
XXXXX.X Meters
DIAGNOSTICS
PrinterHead Usage
XXXXX.X Meters
DIAGNOSTICS
Head On Time
XX.X Hours
DIAGNOSTICS
Reset Head Data
Resetting
Head Data

SATO GL4xxe Series Specifications

General

Brand	SATO
Model	GL4xxe Series
Category	Barcode Reader
Language	English