Unit 4: Printer Configuration
GL408-412e Operator’s Manual
4-30
Is the premiere menu screen of the Advanced Mode. Allows scrolling and selection of its primary
menu options.
Permits selection of the media handling method desired.
• Tear-Off - factory default. Prints labels until the print buffer is empty, then positions the last
label over the tear bar for removal.
• Continuous - prints continuously and feeds the printed labels along with its backing paper.
• Peel-Off - prints die-cut labels and automatically peels away the backing paper as each label
advances from the printer. The printer waits until the printed label is taken for application
before printing the next label. This method is only supported whenthe Value Peel or the Peel-
Off Rewinder option is installed. A Remove Label message will display on the LCD prompting
label removal for each label printed.
• Cut - cuts printed labels or tags at the user specified intervals. Cutting may occur after each
printed label/tag or following a specified quantity. Only available with cutter asembly installed.
• Rewind - rewinds printed labels onto a spindle assembly. This option is used for efficient
storage of the printed labels to be applied at a later date. Only available with rewinder
assembly installed.
ADVANCED MODE (TABLE 4-3)
MENU DESCRIPTION
To Next Page
Loading...
