Section 4: Troubleshooting
GY412 Operator Manual Page 4-7
4.2.4 Error Code
Cause of command error will be indicated in code in “cc” where an error being displayed.
Error types
Code Cause
01 Analyzed improper command
02 Received improper parameter
03 Analyzed improper graphic and external character data
04 Specified memory area (Card slot) is incorrect
05 Number specified by registration command is already taken
06 Outside the registration area
07 Data is not registered
08 Specified print start position is outside the printable area
09 Printing image is outside the printable area (Barcode only)
To Next Page
Loading...
