SATO GY412 - RS-232 C Serial Interface

Section 7: Interface Specifications
GY412 Operator Manual Page 7-3
7.3 RS-232C SERIAL INTERFACE
7.3.1 Basic Specifications
The interface of this printer complies with RS-232C.
Enter the interface mode of the printer or use the printer setting tool for setting up.
7.3.2 Basic Specifications of RS-232C Serial Interface
This interface complies with the RS-232C standard.
Interface connector
Interface connector Printer side DB-9S or equivalent (Female)
Cable side DB-9P or equivalent (Male)
Communication
settings
Use Printer configuration tool to setup.
Standard installation is required.
RS-232C