SATO GY412 - Page 214

Section 8: Appendix
Page 8-32 GY412 Operator Manual
8.10 PRINT OPERATION SEQUENCE (cont’d)
Notes:
• In the above diagram, 1 label = print data length.
• Send the print data for two labels.
Upper head
Pitch sensor
Finished double sided print of the
second label.
Lower head
Label feed to cut position
Up
Down
ུཱིིཱ
Up
Down
ུཱིིཱ
Cut position
Up
Down
ུཱིི
Cut the second label
ཱ
Up
Down
ུཱིི
Backfeed motion
Up
Down
ི
Standby
(2) Timing chart
Label feed
Label cut
Upper/Lower
heads check
Printer motion
Prints the 1
s
t
label (Lower)
Prints the 1
s
t
label (Upper)
Power ON
Backfeed
Prints the 2
n
d
label (Lower)
Prints the 2
n
d
label (Upper)
Upper head
motion
Lower head
motion
Label feed to
cut position
Backfeed