SATO GY412 - Page 216

Section 8: Appendix
Page 8-34 GY412 Operator Manual
8.10 PRINT OPERATION SEQUENCE (cont’d)
Notes:
• In the above diagram, 1 label = print data length.
• Send the print data for two labels. Head check is specified for the last item.
Upper head
Pitch sensor
Finished the print of the second
label
Lower head
Feed to cut position
Up
Down
ུཱིིཱ
Up
Down
ུཱིིཱ
Cut position
Up
Down
ུཱིི
Cut the second label
ཱ
Up
Down
ུཱིི
Head check is executed during
backfeed motion
Head check
Up
Down
ི
Waiting

(2) Timing chart
Label feed
Label cut
Upper/Lower
heads check
Printer motion
Prints the 1
s
t
label (Lower)
Prints the 1
s
t
label (Upper)
Power ON
Backfeed
Prints the 2
n
d
label (Lower)
Prints the 2
n
d
label (Upper)
Upper head
motion
Lower head
motion
Label feed to
cut position
Backfeed
