SATO GY412 - Page 65

Section 3: Operation and Configuration
GY412 Operator Manual Page 3-37
3.3 LCD MESSAGE DETAILS (cont’d)
Display User Mode - Zero slash setting
Onscreen
message
This enables or disables zero slash setting.
Use the left and right arrow buttons to move the
cursor, and then press ENTER.
YES: (0) will be accompanied by a slash.
NO: No slash will appear.
The default setting is NO.
Operation
button
Button Description
→, ← Moves the cursor.
ENTER Saves the setting, and goes to the CHARACTER
CODE screen.
CANCEL Goes to the CUTTER OFFSET screen without
saving the setting.
FUNCTION Goes to the ONLINE MODE screen, without sav-
ing the setting.
NO
ZERO SLASH
YES