SATO M-8485Se - SPECIFICATIONS

SPECIFICATIONS
Page1-2PN9001073RevCSATO"Se"PrintEngines
Section 1. Printer Overview
SPECIFICATION M-8485Se M-8460Se M-8490Se M-8459Se
PRINT
Method Direct or Thermal Transfer Direct Only
Speed (User Selectable) 4 to 12 ips
100 to 300 mm/s
4to8ips
100 to 200 mm/s
4to8ips
100 to 200 mm/s
2to5ips
50 to 125 mm/s
Print Module (Dot Size) .0049 in.
.125 mm
.0033 in.
.083 mm
.0049 in.
.125 mm
Resolution 203 dpi
8 dpmm
305 dpi
12 dpmm
203 dpi
8 dpmm
Maximum Print Width 5.0 in.
128 mm
1024 dots
6.0 in.
152 mm
1216 dots
4.4 in.
112 mm
1344 dots
4.4 in.
112 mm
896 dots
Maximum Print Length 49.2 in.
1249 mm
32.8 in.
833 mm
49.2 in.
1249 mm
MEDIA
Minimum Width 1.0 in. (25 mm) 2.0 in. (53 mm) 1.0 in. (25 mm) 1.0 in. (25 mm)
Minimum Length
(1)
.25 in. (6 mm) .25 in. (6 mm) .25 in. (6 mm) .25 in. (6 mm)
Maximum Width 5.25 in
134 mm
6.5 in.
165 mm
5.25 in.
134 mm
5.25 in
134 mm
Type Die Cut Labels, Fan-Fold or Continuous
Maximum Caliper .010 in. (.25 mm)
Max Unwind torque 8.8 lbs (4 Kg) with 5 in. wide labels
Backing Rewind Tension 400 g or less
LABEL SENSING
Transmissive See-Thru Adjustable
Reflective Eye-Mark Fixed
RIBBON
Maximum Width 5.25 in.
134 mm
6.5 in.
165 mm
5.25 in.
134 mm
N/A
Minimum Width 1.55 in.
39.5 mm
2.1 in.
53 mm
1.55 in.
39.5 mm
N/A
Length 1968 ft (600 M) N/A
Thickness 4.5 micron, Face-In Wind N/A
All specifications subject to change without notice.
(1) Minimum label length at print speeds greater than 6 ips is 1.0 in.