Expanded Memory Function
Form Overlay Store
Command Structure <ESC>&S,aa,bbbb,cccc
aa = Store Number (01 to 99)
bbbb = Horizontal size of window (50 to H max)
cccc = Vertical size of window (50 to V max)
Example: <ESC>&S,01
Placement: Following the <ESC>CC Memory Area select
Command
Default: None
Command Function To store a label image in Expanded Memory
Printer Input
<ESC>A
<ESC>CC1
<ESC>&S,01
<ESC>Z
Printer Output There is no printer output as a result of this command.
Special Notes 1. The <ESC>CC Memory AreaSelect command must be sent
before this command.
2. The label image must be divided from other label images by the
<ESC>A and <ESC>Z bounding commands.
3. The parameters of “bbbb” and “cccc” may be omitted. By
specifying them, the label image can be moved by using the
<ESC>V and <ESC>H position commands when recalling the
label image. If the repositioned label image exceeds beyond the
printable area, the image will be truncated. If an <ESC>A1 Media
Size Command has been sent to the printer, the maximum size
form that can be stored is the size of label defined by the
command.
4. A label image cannot be stored in a location that already contains
data.
5. Graphics, PCX and BMP files can be stored with this command.
Page5-88PN9001073RevCSATO“Se”PrintEngines
Section 5. Programming Reference
To Next Page
Loading...
