SATO M-8485Se - Memory Area Select

Expanded Memory Function
Memory Area Select
Command Structure <ESC>CCa
a = Memory Area
1 Memory Area 1
2 Memory Area 2
Example: <ESC>CC1
Placement: Immediately following the <ESC>A Start Code.
Default: Last selected Memory Area.
Command Function Selects the Memory Area to be used for following Expanded Memory
commands.
Printer Input
<ESC>A
<ESC> CC1
{commands}
<ESC>Z
Printer Output There is no printer output as a result of this command.
Special Notes 1. This command requires the Expanded Memory option. See your
SATO representative for more information.
2. The Memory Areas specified by this command may be reversed
using the LCD menu/configuration panel.
3. Unless otherwise modified via the LCD menu/configuration panel
(see Section 3:Card Mode), CC1 selects the PCMCIA Expanded
Memory and CC2 selects the internal Expanded Memory.
Page5-98PN9001073RevCSATO“Se”PrintEngines
Section 5. Programming Reference