REAR PANEL
Power On/Off Switch To turn power On or Off
Operation Panel To set up the various configurations and to display
dispensing quantity and the various alarms.
Adjustment Panel Potentiometers (inside label compartment) to make
setup adjustments.
AC Input Connector To input 115V 50/60 Hz. Use the power cable
provided.
AC Fuse To protect the machine from abnormal power input.
Type 15A/250V.
Interface Slot Slot for installation of Plug-In Interface Module.
EXT Connector This is an external signal connector for interfacing with
the label applicator system.
Memory Card Connectors for Optional PCMCIA Memory Cards.
Page2-4PN9001073RevCSATO“Se”PrintEngines
Section 2. Installation
EXT Connector
Memory Card
Slot Cover
Plug-In Interface
Module
AC Input
Connector
AC Fuse
To Next Page
Loading...
