APPENDIX D.
OPTIONAL ACCESSORIES
This section contains instructions for using the following features:
• PCMCIA Memory Cards
• Memory Option
• Top Mounted Reflective Sensor
PCMCIA MEMORY CARDS
Description
The Memory Card Option provides the connectors and interface board for one
PCMCIA memory cards slots. The printer memory can be expanded up to 16MB.
Type SRAM or Flash-ROM
Applicable Specifications PCMCIA Version 2.1 (JEIDA Version 4.1)
Size Up to 4 MB SRAM or 16MB Flash ROM
Connector Pins 68
Battery Two years for SRAM type (approximately)
Write Protect Yes
Low Battery Detect Yes (SRAM only)
Installation
Instructions for installing the Memory Card Option are included with the installation
kit.
Error Handling
Memory Card error conditions are indicated to the operator using a combination of
the ERROR LED on the front panel and the audible indicator.
SATO“Se”PrintEnginesPN9001073RevCPageD-1
To Next Page
Loading...
