SATO M-8485Se - Print Length, Expanded

Print Length, Expanded
Command Structure <ESC>EX0 Sets the print length to maximum
<ESC>AR Resets the maximum print length to 7" (178 mm)
Example: See above
Placement: Must follow the Start Code command
and be in it’s own separate data stream.
Default: <ESC>AR (7")
Command Function To increase the maximum print length (in feed direction) for a label.
Input to Printer <ESC>A
<ESC> EX0
<ESC>Z
<ESC>A
<ESC>H0050<ESC>V0100<ESC>WB1EXPAND TO:
<ESC>H0050<ESC>V2700<ESC > WB149 INCHES
<ESC>Q1<ESC>Z
<ESC>A
<ESC> AR
<ESC>Z
Printer Output
SATO“Se”PrintEnginesPN9001073RevCPage5-59
Section 5. Programming Reference
49
49”