Special Notes 1. EX0 is effective until AR is sent to reset the printer to its standard
print length, or until the printer is repowered.
2. It may be included in an independent data stream to specify the
size of the maximum print area:
3. When this command is used with the <ESC>& Store Form
Overlay command the Form length cannot exceed the maximum
specified.
7. If a job contains elements out of the memory range, it is ignored.
8. If the Forms Overlay command <ESC>& is used with Expanded
Memory to expand the print area, the Form Overlay length is still
limited to the maximum..
Page5-60PN9001073RevCSATO“Se”PrintEngines
Section 5. Programming Reference
LENGTH M-8459S M-8460S M-8485S M-8490S
<ESC>A
<ESC>EX0
<ESC>Z
49.2"
1249 mm
2848 dots
49.2"
1249 mm
2848 dots
49.2"
1249 mm
2848 dots
32.8"
833 mm
4272 dots
<ESC>A
<ESC>AR
<ESC>Z
7"
178 mm
1424 dots
7"
178 mm
1424 dots
7"
178 mm
1424 dots
7"
178 mm
2136 dots
To Next Page
Loading...
