M-8459Se M-8460Se M-8485Se M-8490Se
OB Font Matrix 20 W x 24H 30W x 36H
Paa Character Pitch. Designates the number of dots between characters.
aa = Number of dots between characters (01-99)
5-26
PR Fixed Font Spacing. Returns the printer to fixed character spacing
mode.
5-25
PS Proportional Font Spacing. Places the printer in the proportional
character spacing mode. Will not work with U Font.
5-28
Qaaaaaa Print Quantity. Specifies the total number of labels to print.
aaaaaa = Total number of labels to print for the job
(000001-999999)
5-63
RDabb,ccc,
ddd,nn...n
Font Type. Specifies the internal AGFA raster fonts.
a = A Specifies CG Times font
B Specifies CG Triumvirate font
bb = Always 00
ccc = Horizontal Size (16 to 999 dots or P08 to P72 point size)
ddd = Vertical Size (16 to 999 dots or P08 to P72 point size)
nn..n = Data to be printed
5-35
RMaaaa,bbbb Mirror Image. Prints mirror image of data. Must be preceded by an A1
Media Size Command. Must be preceded by an <ESC>A1 Media Size
command.
5-54
S Font type. Specifies the 8W x 15H dot matrix font (including
descenders).
5-33
Tabcc(data) Store Custom Designed Characters. To create and store custom
characters or images in the printer’s volatile memory. See Kab90cc to
recall the character for printing.
a = 1 16 x 16 matrix
2 24 x 24 matrix
b = Specifies data stream format to follow
B Binary
H Hexadecimal
cc = Memory location to store the character.
Valid locations are 21 to 52 or “!” to “R” in hex values.
(data)= Data to describe the character.
5-21
U Font type. Specifies a 5W x 9L dot matrix font (including descenders). 5-33
Vbbbb Vertical Position. Specifies a field’s vertical location down the length
of the label from the current base reference point. Units of
measurement are dots.
5-61
M-8459Se M-8460Se M-8485Se M-8490Se
bbbb = Vert Position
Expanded
0001 to 1424
0001 to 9999
0001 to 2136
0001 to 9999
WBa Font type. Specifies the 18W x 30L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater
than 3
5-38
SATO“Se”PrintEnginesPN9001073RevCPageA-6
Appendix A: Command Quick Reference
INSTRUCTION DESCRIPTION PAGE
To Next Page
Loading...
