$=(data) Data for Vector font. 5-36
#Ea Print Darkness. Specifies a new print darkness setting. The lightest
setting is “1”. There are three darkenss levels (five for the M-8459Se)
that can be specified.
5-58
M-8459Se M-8460Se M-8485Se M-8490Se
a = Print
Darkness
1, 2, 3, 4, or
5
1,2or3 1,2or3 1,2or3
(aaaa,bbbb Reverse Image. Reverse image from black to white and vice versa.
Units of measure are dots.
5-68
M-8459S M-8460S M-8485S M-8490S
aaaa = Hor
Length
0001 to
0896
0001 to
1216
0001 to
1024
0001 to
1344
bbbb = Vert
Length
Expanded
0001 to 1424
0001 to 9999
0001 to
2136
0001 to
9999
& Store Form Overlay. Stores a specified label image in the printer’s
volatile form overlay memory.
5-42
/ Recall Form Overlay. Recalls the label image from the printer’s
formoverlay memory for printing.
5-41
0 (zero) Replace Data (Partial Edit). Provides the ability to replace a specified
area of the previous label with new data.
5-66
*a Clear Print Job(s) and Memory. Clears individual memory and
buffers.
a = When not included in command, clears print jobs in
Multi-Buffer mode.
a = If included in command, specifies memory section to be
cleared
T Custom character memory, printer
& Form overlay memory, printer
X Clears all memory all memory and buffers
5-29
@,nnnn Off-Line. Signals the printer to go off-line after the completion of a print
job.
nnnn = Optional message to be displayed on the LCD panel.
Maximum of 32 characters.
5-56
2D3m,a,bb,c
d,ee,ff,gg
QR Code. Prints QR Code symbols. See command description for
parameter definition and usage.
5-110
SATO“Se”PrintEnginesPN9001073RevCPageA-8
Appendix A: Command Quick Reference
INSTRUCTION DESCRIPTION PAGE
To Next Page
Loading...
