SATO M-8485Se - Page 224

BJRabbccdd
eeeeff..f
TrueType Font Recall. Recalls a previously stored bit mapped
TrueType font for use.
a = Font ID (1-9
bb = Horizontal Expansion (01-12)
cc = Vertical Expansion (01-12)
dd = Character pitch (01-99)
eeee = Number of characters
ff...f = Data to be printed using font
5-83
BJS Expanded Memory Status. Reports the status of the currently active
Memory Card to the host by printing a status label.
5-99
BJTaa,bb,cc,
dd,ee,fff,gg..g
TrueType Font Recall. Recalls a previously stored bit mapped
TrueType font for use.
aa = Font ID (01-99
bb = Horizontal Expansion (01-12)
cc = Vertical Expansion (01-12)
dd = Reserved, always 00
ee = Character pitch (01-99)
ffff = Number of characters
gg...g = Data to be printed using font
5-83
CCa Memory Area Select. Selects the Memory area for all following
Expanded Memory commands.
a = 1 Memory Area 1
b = 2 Memory Area 2
5-98
GCaaa Recall BMP Graphic. Recalls BMP graphic files stored in Expanded
Memory.
5-90
GIabbbcccddd
ee...e
Store Custom Graphics. Stores a graphic image in the memory card
to be called later for printing on a label.
a = Specifies format of data stream to follow
B Binary
H Hexadecimal
bbb = Number of horizontal8x8blocks
ccc = Number of vertical8x8blocks
ddd = Graphics storage number (001-999)
ee...e = Data to describe the graphic image
5-93
GRccc Recall Custom Graphics. Recalls for printing the graphic image
stored by the GI command.
ccc = Storage number (001-999)
5-92
GTaaa,bbbbb,
nn...n
Store BMP Graphics. Stores BMP files in Expanded Memory.
aaa = Storage area number (001 to 999)
bbbbb= Size of BMP file in bytes
nn...n = Data
5-91
PIaaa,bbbbb,
cc...c
Store PCX Graphics File. Stores a PCX graphic file.
aaa = Storage number (001-999)
bbbbb= Number of bytes in the file to be stored.
5-96
PYaaa Recall PCX Graphics File. Recalls a PCX graphics file.
aaa = The storage number assigned to the file (001-999)
5-95
YR,aaa
/D,bb,cc...c
Recall Format/Field. To recall a field from a format previously stored
in the memory card.
aaa = Number of format to be recalled (001 to 999)
bb = Number of field to be recalled (01-99)
cc...c = Data to be placed in field.
5-85
SATO“Se”PrintEnginesPN9001073RevCPageA-10
Appendix A: Command Quick Reference
INSTRUCTION DESCRIPTION PAGE